Release

Search

Follow-me forwarding settings

Link copied to clipboard

On this panel, you can specify phone numbers for call forwarding and configure the forwarding parameters.Follow-me forwarding settings

Each entry in the follow-me list is created as active. Turn off the toggle switch next to a number to temporarily disable forwarding to a follow-me number.

Order

Link copied to clipboard

Specify the order for redirecting a call:

  • As listed – try every active follow-me number from the first (topmost) number to the last, until the call is answered. To change the number order in the list, select a specific follow-me number using Reorder v5hMFlBe1XBZ6WeY6wAAAAABJRU5ErkJggg== and drag it up or down.
  • Random – try numbers in random order.
  • Simultaneous – call all active follow-me numbers from the list at the same time until the call is answered.
  • Percentage split – try numbers based on the percentage specified.

Percentage %

Link copied to clipboard

This field is only available when a Percentage list order is selected.

It shows the percentage of calls that PortaSwitch sends to a specific number. Note that the total percentage for all numbers in the follow-me forwarding list should be 100%. When you add the new follow-me number, it has 0% set by default.

Note that when the Percentage list order is selected, you can delete a forwarding number only when the percentage value of the remaining numbers on the list equals 100. For example, if you have 3 forwarding numbers with the following percentages: 50% to 18005558901, 15% to 18005558902, and 35% to 18005558903, and need to delete 18005558902, do the following:

  • delete the 18005558902 number;
  • change the percentage values for the remaining numbers so that their total percentage equals 100 (e.g., 60% to 18005558901, 40% to 18005558903); and
  • save the changes.

Name

Link copied to clipboard

The name of the follow-me record, e.g., “mobile phone”.

Forward to

Link copied to clipboard

Specify a phone number to forward calls to. It will be translated according to the customer’s dialing rules.

Timeout

Link copied to clipboard

Specify how much time to wait, in seconds, until a call is answered. After the timeout, the call is either redirected to the next follow-me number or disconnected.

When a call is forwarded to a hunt group with a Random, Order, or Least Used hunt order, every extension rings for the specified timeout. For example, let’s say the hunt group with the Random hunt order contains 3 extensions and the forwarding timeout for this hunt group is set to 10 sec. Thus, a total timeout for a hunt group is about 30 sec. If the extensions have individual follow-me configuration, every number in the follow-me list will ring for 10 sec.

Add time periods

Link copied to clipboard

Define the period when it’s allowed to send calls to a specified number. By default, the calls are forwarded to this number 24/7.

To set a specific period, click Add period and specify the period details in the dialog that opens:

  1. Time – define the time for the period:
    • Start time – define the exact time when the period starts.
    • End time – define the exact time when the period ends.

    If you want the period to take the whole day, turn on the Select whole day toggle. Click Continue to proceed.

    Off-peak period interval create time

  2. Days – define the days of the week and/or of the month for the period:
    • Days of the week – click on the specific days of the week to add them to the period.
    • Days of the month – specify days of the month as comma-separated values, e.g., 1, 4, 5. To add a day's period, specify the values separated by dashes, e.g., 15-30.

    If you want the period to cover the whole month (all days), turn on the Select all days toggle.

    Off-peak period interval create day

  3. Months – click the names of the months you want to add to the period. If you want the period to cover all months of the year, turn on the Select all months toggle.

    Off-peak period interval create months

  4. Click Finish to save the period configuration.

To delete the period, click Delete . To change the period, click Edit .

To add more periods, click Add add-circle and specify the details in the dialog that opens.

Calling party display

Link copied to clipboard

Choose how to display a caller's info during forwarding:

  • Caller number and name – the call is forwarded with the phone number and the name of the original caller (e.g., if A calls B, but the call is forwarded to C, C will see that it is A who is calling).
  • Caller number and forwarder name – the phone number of the caller and the forwarder name are put into the CLI of the forwarded call (e.g. if A calls B, but the call is forwarded to C, C will see A’s phone number and B’s name).
  • Forwarder number and name – the call is forwarded with the phone number and the name of the forwarder (if A calls B, but the call is forwarded to C, C will see that it is B who is calling).

How to add a new follow-me number

Link copied to clipboard

To add a new follow-me number, click Add .

How to add a new follow-me number

How to disable forwarding to a follow-me number

Link copied to clipboard

To temporarily disable forwarding to the follow-me number, turn off the toggle near a specific number.

How to disable forwarding to a follow-me number

How to a delete follow-me number

Link copied to clipboard

To delete a follow-me number, click Delete to delete the follow-me number. Note that at least one number should be left.

On this page

Release
What's new
Admin manuals
Handbooks
API
UI help
Search