Release

Search

The Routing list panel displays the list of routes that matches your routing simulation parameters.

The routes on the Routing list panel are tried according to their position in the list. Refer to the Call routing chapter for more details.

Routing simulation list panel

Excluded pXEYgm3hDLbHvpOu0dqd9RJvKIeFwnZwAAAABJRU5ErkJggg== indicates that the route is excluded from the routing list due to huntstop.

Thumb down gMBgG+HpHHnZRnO3wAAAABJRU5ErkJggg== indicates that the adaptive routing criteria are currently applied to this route.

Each entry in the routing list consists of:

#

Link copied to clipboard

The sequential number that shows the route order. The routes from the top of the list will be tried first.

CLD sent to vendor

Link copied to clipboard

The translated called station ID (DNIS), as it will be sent to the vendor using this route.

Vendor

Link copied to clipboard

The сall terminating vendor.

Connection

Link copied to clipboard

The name of the vendor connection. Click the connection name to open the connection details.

IP/Node

Link copied to clipboard

The node (or remote gateway IP) where the call will be routed.

Country

Link copied to clipboard

The country the tested phone number or destination belongs to.

Description

Link copied to clipboard

The destination description.

Tariff

Link copied to clipboard

The name of the vendor tariff used to charge this call. Click the tariff name to open the tariff details.

Destination

Link copied to clipboard

The matching destination from the tariff.

Penalty

Link copied to clipboard

Shows whether the adaptive routing penalty is applied to the route. To add/remove this column, click Settings settingson the title bar, click Customize columns, and select/clear the Penalty checkbox.

Price

Link copied to clipboard

The next interval price for the specific destination (per minute).

Peak level

Link copied to clipboard

Shows whether “Peak”, “Off-peak” or “Second off-peak” price is applied at the selected time. To add/remove this column, click Settings settings on the title bar, click Customize columns, and select/clear the Peak level checkbox.

Route category

Link copied to clipboard

The route category, e.g., “Premium,” “Cheap,” specified in the corresponding rate.

Preference

Link copied to clipboard

The routing priority specified in the corresponding rate.

Huntstop

Link copied to clipboard

The Check mark check mark greyindicates that this route has huntstop enabled. This signals that the routes with a lower route category or preference will be ignored. See the Rate routing parameters chapter for more details on routing parameters.

See Also

On this page